read all the latest battery information and tips here.

How To Recondition Or Refresh Your Power Tool Batteries?

Power Tools Battery Shop

Power Tools Batteries, Cordless Drill Batteries, Dewalt Power Tools Batteries, Makita Power Tools Batteries, Bosch Power Tools Batteries, Milwaukee Power Tools Batteries for USA power tools users.
Power Tools Battery Shop High Quality and Superb Service, Season Promotion, 35% discount

Power tool batteries are typically nickel cadmium rechargeable batteries
Power tools use batteries or electricity to function, and batteries can be rechargeable or for one-time use. Typically, they are rechargeable. Nickel cadmium, or NiCd batteries, are normally used in power tools. These can be charged up to around 1,000 times before they need replacing. Reconditioning, especially after months of no use, is very good for these batteries, and should be done about once a month throughout battery life to ensure proper functioning and optimal lifespan.
[caption id="" align="alignnone" width="100" caption="MAKITA 1834 Power Tool Battery 18V 3000mAh Ni-MH"]MAKITA 1834 Power Tool Battery 18V 3000mAh Ni-MH[/caption]

Replacement for MAKITA 1834 Power Tool Battery

Fit Models: [ MAKITA 6343DBE ]

Ni-MH, 3000mAh, 18 V

Factory-direct Price : USD $ 77.25

Instructions

  1. Run the battery in the power tool without any obstruction. For instance, if you have a power drill, run the drill by itself, do not try to drill in anything; just let the battery run until it’s dead.
  2. Plug the power tool battery charger into the electrical outlet.
  3. Charge the battery back to full capacity.
  4. Run the battery as before until it is dead again.
  5. Recharge the battery again.
  6. Repeat once a month, or if this process has not improved your battery’s performance, throw that one away and purchase a new one.

MILWAUKEE 48-11-1014 Power Tools Battery 14.4V 3000mAh Ni-MH

Fit Models: [ MILWAUKEE 0612-26 ]
Ni-MH, 3000mAh, 14.4 V
Factory-direct Price : USD $ 76.11

How to Refresh Power Tool Batteries

Power tool batteries that are rechargeable can develop a memory if they aren’t used often or used to their full charge. Once a battery develops memory it can seem to be fully charged but when you use the tool, the battery will be dead within a few minutes. This is an annoying feature of rechargable power tool batteries that you can fix in just a few days with a couple of simple steps.

Instructions

  1. Hook the battery to the power tool and use the tool, or run the tool until the battery goes completely dead. Then leave it attached to the tool overnight.
  2. Run the tool with the battery in the morning. If it will run the tool, use it until it goes completely dead. By doing this, you are essentially erasing the memory in the battery and deleting the false empty cycle of the battery.
  3. Place the battery on the charge only when it will not power the tool at all. Let it charge fully, which should take overnight.
  4. Run the tool with the battery attached until it is again completely dead. Don’t charge the battery again until it’s completely dead.
  5. Repeat the charge and drain process several times, and the battery will get better at holding a charge and charging completely.

MILWAUKEE 48-11-2230 Power Tools Battery 18V 3000mAh Ni-MH

MILWAUKEE 48-11-2230 Power Tool Battery

Fit Models: [ MILWAUKEE CP8745 ]

Ni-MH, 3000mAh, 18 V

Factory-direct Price : USD $ 79.35

Related articles

  1. How to Maximize Power Tools Battery Performance

  2. Power Tools Battery Maintenance Tips

Did you like this? Share it:
Power Tools Battery Shop

Power Tools Batteries, Cordless Drill Batteries, Dewalt Power Tools Batteries, Makita Power Tools Batteries, Bosch Power Tools Batteries, Milwaukee Power Tools Batteries for USA power tools users.
Power Tools Battery Shop High Quality and Superb Service, Season Promotion, 35% discount

Power tool batteries are typically nickel cadmium rechargeable batteries
Power tools use batteries or electricity to function, and batteries can be rechargeable or for one-time use. Typically, they are rechargeable. Nickel cadmium, or NiCd batteries, are normally used in power tools. These can be charged up to around 1,000 times before they need replacing. Reconditioning, especially after months of no use, is very good for these batteries, and should be done about once a month throughout battery life to ensure proper functioning and optimal lifespan.

Replacement for MAKITA 1834 Power Tool Battery

Fit Models: [ MAKITA 6343DBE ]

Ni-MH, 3000mAh, 18 V

Factory-direct Price : USD $ 77.25

Instructions

  1. Run the battery in the power tool without any obstruction. For instance, if you have a power drill, run the drill by itself, do not try to drill in anything; just let the battery run until it’s dead.
  2. Plug the power tool battery charger into the electrical outlet.
  3. Charge the battery back to full capacity.
  4. Run the battery as before until it is dead again.
  5. Recharge the battery again.
  6. Repeat once a month, or if this process has not improved your battery’s performance, throw that one away and purchase a new one.

MILWAUKEE 48-11-1014 Power Tools Battery 14.4V 3000mAh Ni-MH

Fit Models: [ MILWAUKEE 0612-26 ]
Ni-MH, 3000mAh, 14.4 V
Factory-direct Price : USD $ 76.11

How to Refresh Power Tool Batteries

Power tool batteries that are rechargeable can develop a memory if they aren’t used often or used to their full charge. Once a battery develops memory it can seem to be fully charged but when you use the tool, the battery will be dead within a few minutes. This is an annoying feature of rechargable power tool batteries that you can fix in just a few days with a couple of simple steps.

Instructions

  1. Hook the battery to the power tool and use the tool, or run the tool until the battery goes completely dead. Then leave it attached to the tool overnight.
  2. Run the tool with the battery in the morning. If it will run the tool, use it until it goes completely dead. By doing this, you are essentially erasing the memory in the battery and deleting the false empty cycle of the battery.
  3. Place the battery on the charge only when it will not power the tool at all. Let it charge fully, which should take overnight.
  4. Run the tool with the battery attached until it is again completely dead. Don’t charge the battery again until it’s completely dead.
  5. Repeat the charge and drain process several times, and the battery will get better at holding a charge and charging completely.

MILWAUKEE 48-11-2230 Power Tools Battery 18V 3000mAh Ni-MH

MILWAUKEE 48-11-2230 Power Tool Battery

Fit Models: [ MILWAUKEE CP8745 ]

Ni-MH, 3000mAh, 18 V

Factory-direct Price : USD $ 79.35

Related articles

  1. How to Maximize Power Tools Battery Performance

  2. Power Tools Battery Maintenance Tips

Tweet Did you like this? Share it:Tweet Tweet This Post

&source=Battery Tips, Battery Blogs, Laptop Battery Tips, Power Tools Battery Tips" class="linkedin" title="Share this on Linkedin">LinkedIn
LinkedIn
  • Technorati favorites
    Technorati
  • Reddit
    reddit
  • Mixx
    Mixx
  • Newsvine
    Newsvine